26.1 C
New York
Tuesday, October 3, 2023

Buy now

Easy Hacks to Fix Amped Extender Keeps Disconnecting Issue

The Amped extender keeps disconnecting issue has ruined the internet-usage experience of various users out there. In case you are also fed up because of the same annoying issue, you ought to walk through the troubleshooting hacks mentioned in this article. Now, we cannot guarantee you that all of them will help you out, but surely one or two will. Taking this into consideration, it is recommended that you keep reading.

For your information, in one of the troubleshooting hacks, you will have to access the setup.ampedwireless.com web address. Thus, keep it jotted down somewhere.

[Fixed] Amped Extender Keeps Disconnecting Issue

  1. Power Cycle the Amped Extender

The most obvious factor that might have led to Amped extender keeps disconnecting issue are technical glitches. But, the great thing is that you can get rid of them by simply power cycling your Amped wireless range extender. You can power cycle or restart your wireless range extender by simply turning it off, waiting for some time, and then, turning it back on.

After following this troubleshooting hack, if you are still not able to troubleshoot the Amped extender keeps disconnecting issue; you should not stop reading this article.

  1. Check the Ethernet Connection

Is the Ethernet cable which you used to connect the Amped wireless range extender and the host router damaged from any point? Nodding your head in yes? Well then, you just faced another reason behind the Amped extender keeps disconnecting issue. To eliminate it as one, you should replace the Ethernet cable with another one, a non-damaged one.

Just make sure that the connection established by the new one is not loose. Otherwise, you will end up inviting more issues to the table.

  1. Move the WiFi Devices Closer

Another reason why you are going bonkers because of the Amped extender keeps disconnecting issue is because too much distance is separating your Amped wireless range extender and the host router. A lot of it can make it difficult for the signals emitted from them to get transmitted throughout the house.

To take care of the problem, take our advice and move them close to each other. But, do not keep them too close. Or else, their signals will clash.

  1. Update the Extender Firmware

Did none of the aforementioned troubleshooting hacks help you to resolve the Amped extender keeps disconnecting issue? Well, it might be because the firmware of your wireless range extender is running on its outdated version. Thus, it is recommended that you update it without wasting any more time.

Now, you might be wondering how to execute the process, isn’t it? Well, consider accessing the Ampedhttps://amped-wirelesslogin.com/setup-ampedwireless-com/ setup wizard for this very purpose.

  1. Perform Factory Default Reset

Considering you are reading this troubleshooting hack, it means that none of the hacks given above helped you to resolve the Amped extender keeps disconnecting issue. In this case, you are left with no other option than to restore your networking device to its default factory settings. In other words, you have got to reset your device.

Many users find the process of resetting the device very daunting. If you are one of them, then the following guidelines will surely be of some help to you. Continue reading.

  • Look for the Reset button on the Amped extender.
  • Once you find it, press it and hold on for some time.
  • Before you even know it, your Amped extender will go back to its default mode.
  • For that, your device will reboot first.

In this manner, you will easily be able to restore your device to its factory settings. Taking into consideration that your networking device has gone back to being new, set it up from scratch. For that, you can either use the WPS method or the Manual method.

Wrap Up

With the hope of being productive, we are ending our guide written on how to resolve the Amped extender keeps disconnecting issue. Hopefully, one of the hacks given above helped you to get your wireless range extender up and running with ease. On the off chance, you are still stuck with the same issue, then strike up a conversation with your fellow readers.

What do you think of this article? Did you like reading it? Do share your feedback via the comment section. Trust us, it will be appreciated.

Related Articles


Please enter your comment!
Please enter your name here

[td_block_social_counter facebook=”tagdiv” twitter=”tagdivofficial” youtube=”tagdiv” style=”style8 td-social-boxed td-social-font-icons” tdc_css=”eyJhbGwiOnsibWFyZ2luLWJvdHRvbSI6IjM4IiwiZGlzcGxheSI6IiJ9LCJwb3J0cmFpdCI6eyJtYXJnaW4tYm90dG9tIjoiMzAiLCJkaXNwbGF5IjoiIn0sInBvcnRyYWl0X21heF93aWR0aCI6MTAxOCwicG9ydHJhaXRfbWluX3dpZHRoIjo3Njh9″ custom_title=”Stay Connected” block_template_id=”td_block_template_8″ f_header_font_family=”712″ f_header_font_transform=”uppercase” f_header_font_weight=”500″ f_header_font_size=”17″ border_color=”#dd3333″]
- Advertisement -spot_img

Latest Articles