As soon as the Netgear extender powered up, the LED lights located on it supposed to turn solid green. But, it has been noticed that many Netgear users don’t see the solid green light on their extenders. They either come across the orange or the red light which simply means that the extender has become a victim of an issue.
Are you also facing the Netgear extender light not turning green problem? In case the question has received a positive response, then, first of all, we would like you to tell you that sometimes the extender’s light doesn’t turn green due to the lack of an upgraded version of the firmware. In that scenario, accessing the Netgear extender login page and updating the firmware is what we recommend.
However, while doing so, make sure that you’re making use of the correct web address as per the OS version of the device. FYI, the mywifiext.local URL works on iOS devices whereas the web address with the “.net” extension works well on Windows devices. Additionally, avoid downloading the wrong firmware file for your extender. Else, you might end up facing more serious problems. However, if a firmware update fails to help you resolve the problem, here’s what you should do.
Fixed: Light on Netgear Extender Not Turning Green
Fix 1: Restart the Extender
Restarting the Netgear extender will help you get rid of technical glitches which might not be allowing the LED lights to turn green. Therefore, do not wait for anything and restart the extender to fix the issue at hand. The steps to restart the extender correctly highlighted below:
- Power off your Netgear wireless extender.
- Unplug it from the power source.
- Give it some time to revive the performance.
- Replug the extender into the power source.
- Power up the extender again.
Fix 2: Check the Power Socket
If restarting the extender doesn’t help you out to resolve the “Netgear extender not turning green” problem, then there is a possibility that the power supply is improper. Why don’t you have a look at the power source supplying electricity to the range extender? Is it all well? In case, it not, then the major culprit behind the issue you’re facing has been found. Therefore, get the power source repaired as soon as possible.
However, if there is nothing wrong with the power source, then the electricity fluctuation might be from the backend. In that scenario, using a UPS is what experts recommend.
Fix 3: Connect Your WiFi Devices Properly
The improper connection between your Netgear extender and the main gateway can also be the reason behind the issue currently in discussion. It seems that you’ve either placed your WiFi devices too far [in the case of wireless connection] or have connected both devices using a damaged cable [wired connection]. Therefore, you suggested to make the connection stable and strong as per the source used.
If you’ve connected your devices with the aid of a wireless channel, then placing them too far or too close can create problems for you. You must place them in such a way that their WiFi signals neither clash nor struggle to communicate. In the context that a wire holding a connection between your Netgear device and the main router, ensure that it not damaged and connected properly to the correct sockets of your WiFi devices.
Fix 4: Reduce Network Traffic
Your probability of stepping on the Netgear extender not turning green issue increases if the network traffic on your home WiFi is too much. Perhaps, the number of devices accessing the network of your extender via the Netgear_ext (SSID) is way too much. Therefore, aim to reduce the wireless network traffic on your range extender. You can do this by:
- Remove additional devices from the WiFi network of your range extender.
- Try to use wired connections wherever possible.
- Cut off WiFi leeches by accessing the settings menu of your WiFi extender.
Final Thoughts
That’s all you can do if the light on your Netgear extender not turning green. We hope that the hacks we’ve discussed above will suffice to help you change the status of the LED light of your Netgear extender from orange or red to green. However, if that still doesn’t happen, you need to reconfigure your range extender. But, prior to that, restore it to the default factory mode by pressing the Reset button or getting into the settings panel via mywifiext.net. Once done, set up the extender again via the WPS method, the Nighthawk app, or the manual method.
