Have you just swapped your internet modem coupled to the Orbi router with a new one? If yes, then you might be looking for the instructions to connect the router to the new modem. Yes? Well, then walk through this post and learn how to connect Orbi to new modem.
Know that you have to erase the configuration of the previous modem from the Orbi router if you wish to add a new modem to your home network. In other words, you are supposed to reset the Orbi router before you step ahead to couple it with a new modem. This way the router won’t try to route the signals of the previous modem which don’t exist in actuality. Given below are the prerequisites to connect the Orbi router to the new modem. Or, to say it simply, the steps to reset the Netgear Orbi router:
- Ensure that a proper power supply is being given to your router.
- After that, push the Reset button.
- The settings from your Orbi router will get erased.
Now, your Orbi router is all set to get connected to new modem. Remember that after the factory reset process, your router will run on the default Orbi login details. Thus, you need to use the factory set values to establish a connection between the Orbi router and the modem.
How to Connect Orbi to New Modem?
Step 1- Create a Hardwired Connection
The process of connecting the Netgear Orbi router to the new modem starts right with a hardwired connection between both devices. However, you can eliminate this connection after creating a wireless connection between them. Therefore, grab an Ethernet cable and use it to connect it to the Orbi router with the modem. The LAN and WAN port of both devices will help you do that. Make sure that the connection created by you is nowhere near loose. Else, you will fail to connect these devices wirelessly.
Step 2- Access the Orbilogin Page
As soon as you’re done with the hardwired connection between your Orbi router and the newly purchased modem, load an internet browser on a computer. The computer is supposed to be accessing the Orbi WiFi network and should be free of viruses. Now, into the browser’s address bar carefully type the web address of the Netgear Orbi router. The address must be entered without mistake. In case you don’t know the default URL of a Netgear Orbi router, know that you can use orbilogin.com or orbilogin.net.
Step 3- Input the Router’s Details
Now, you will find yourself on the login portal of your Orbi device. Here, input the default password as well as the username into the designated fields and click Log In. For your information, the default values of the router’s admin info are case-sensitive. Thus, you should be very careful while entering them. However, if you’re doubtful about their values, refer to the Netgear user manual.
Step 4- Change the Settings
Are you on the dashboard of your Orbi router? If yes, then you will be asked to select the network you wish to route from a list of networks. Select the one that belongs to your newly purchased modem. Thereafter, key in the security key and walk through the prompts appearing on the screen. The connection between your Orbi router and the newly purchased modem will get established.
This is how to connect Orbi to new modem. Now, you are free to discard the Ethernet connection. However, while doing so, make sure that the router is not placed too far from or too close to the modem. Else, all your efforts will get wasted. Once the devices get connected, you need to configure your satellites with the new tweaks made to the router. Thus, reset them the way you reset the router i.e. by pushing the Reset button on the hardware unit. Once done, consider walking through the next section to learn how to connect satellites back to the home network.
How to Add Orbi Satellites after New Modem-Router Setup?
- Switch on your Orbi satellites after connecting them to the nearest power sockets.
- Find the Sync button on your Orbi router and press it.
- Locate the button with the same label on your Orbi satellites.
- All your satellites will get synced with the freshly configured router.
- Once done, access the orbilogin page, and log in to the router.
- Select the Add Satellite option after clicking Menu.
- Follow the on-screen prompts.
Final Words
If you wish to connect your Netgear Orbi router to a newly purchased modem, then you need to set up the whole mesh system from scratch. With the hope of helping you out, we are signing off from the guide revealing how to connect Orbi to new modem.
