Netgear WiFi range extender is one of the best options for those who want to enjoy to access continuous and blazing-fast internet connectivity all over their homes. Once configured successfully via WPS method or using Netgear Genie setup instructions, it delivers unbeatable performance that is never expected before. Although the WiFi range extenders offered by Netgear are high-performing for sure, some users complained to experience a few issues. And, one of the most common issues is that they are getting solid red light on their Netgear WiFi range extender. If you are also in awe of the same issue, we have got you covered.
This piece of writing enlists a number of tested and proven hacks that will surely help you fix “Netgear extender red light” issue. So, without wasting any more time, walk through these hacks and get ready to make the most out of your Netgear WiFi range extender. Keep reading!
How to resolve Netgear Extender Red Light
Fix 1: Reboot Your Netgear Extender
Your Netgear WiFi range extender is giving you the red light issue due to technical glitches. If you want to do away the issue, you need to reboot your device right away.
Hence, to execute the process, we suggest you first disconnect your Netgear extender and router. Once you are done, unplug the extender, wait for some time, and plug it back again. Now, after rebooting your Netgear extender, see if it is still showing red light. If yes, then the next hack might help you out.
Fix 2: Contact Your ISP
Yes, you read it right! The red light issue you are currently facing with your Netgear WiFi range extender might also be from the end of your ISP. So, coordinate with your internet service provider and ask him to fix the issue for you.
Thinking about how this hack is relatable to the issue? If so, then the answer is poor internet connectivity. Yes, that’s true! Poor internet is one of the major reasons behind getting the red light issue.
And, if you find that nothing is wrong from your service provider’s end, head over to the next hack in post.
Fix 3: Check the Extender-Router Connectivity
The “Netgear extender red light” issue can also appear if there is no connection between your extender and the host router. Thus, put your hands on the Ethernet cable and use it for connecting your devices. But, that’s not enough! You have to ensure that your devices are properly connected via Ethernet source and the cable is connected in to the correct ports of the devices.
After making a connection between your Netgear extender and router, see if you are still getting red light issue on the device. If yes, then it means that there are still connectivity issues between them. To verify the same, access http://mywifiext.local on an iPad, Apple device, or MacBook. And, if you have Windows or Android device, access mywifiext.net!
Are you able to access the provided web addressees? If not, it means connectivity issue continues to appear. In such a case, try connecting your Netgear range extender and router using a wireless source. Ensure that you are receiving sufficient internet speed from your ISP. Then, only you will able to connect your devices successfully using a wireless source and prevent connectivity issues.
Fix 4: Relocate Your Netgear Extender
A thousand of users also face “Netgear extender red light” if their device i.e. extender is:
- Placed away from the host router
- On a lower and congested surface
- Inside cupboard
- Behind computer or laptop
- Near to windows, etc.
So, check the extender’s placement and ensure that you haven’t committed the same mistake. If so, then relocate the device right away. You can locate the extender somewhere higher and airy area in your home, but not away from your host router.
Fix 5: Factory Reset Netgear Extender
You may also experience the “Netgear extender red light” issue if you haven’t configured it in a proper way. In such a case, you need to reset your Netgear extender and then configure it from the scratch,
Although the process of resetting Netgear extender is a piece of cake, a few users find it a rocket science. If you also think the same, then here’s how you can reset your Netgear router.
- First, disconnect your Netgear extender from the router but do not unplug it from the wall socket.
- Then, locate the extender’s reset hole. Once you find it, press it gently and wait for a few seconds. Allow your Netgear device to boot up.
- Now, release the Netgear extender’s factory reset hole and reconnect it with your router via Ethernet or wireless source.
After resetting your Netgear extender, log in to it via www.mywifiext.net and take the initiative to configure it again.
On the off chance if you get www.mywifiext.net not working error, ensure that:
- The web browser you are using is up-to-date
- You haven’t used the private window
- The web address is not entered in the search bar and input in the URL bar without typos
- Browsing history and cache is cleared from the browser
- If you get the same issue again, use 192.168.1.250 IP instead.
Check Also: Why do we need the best lighting
We really hope that after following the hacks listed in this post, you will no more experience “Netgear extender red light” issue. Just in case, the hacks don’t bring you luck, we recommend you update Netgear extender firmware. Yes, an outdated firmware also forces your Netgear WiFi extender to give you red light error.